Skip to main content Skip to navigation
Microscale Thermo-Fluid Lab Conference Papers
  1. Khan, A. I., Reynolds, O. M., Hossan, M. R., Thiessen, D. B., VanWie, B. J., and Dutta, P., “Design, Fabrication, and Testing of Next Generation Desktop Learning Modules for Chemical and Mechanical Engineering Education” Proceedings of the 2022 ASEE Annual Conference and Exposition, June 26-29, 2022.
  2. Van Wie, B. J., Durak, Z. E., Reynolds, O. M., Kaiphanliam, K. M., Thiessen, D. B.,  Adesope, O. O.  Ajeigbe, O. J., Khan, A. I., Dutta P., Watson, C., and Gartner, J. B., “Development, Dissemination, and Assessment of Inexpensive Miniature Equipment for Interactive Learning of Fluid Mechanics, Heat Transfer, and Biomedical Concepts” Proceedings of the 2022 ASEE Annual Conference and Exposition, June 26-29, 2022.
  3. Watson, C., Gartner, J. B., VanWie, B. J., Dutta P., Adesope, O. O., and Curtis, H., “The Effects of Prior Knowledge on Learning with Low-Cost Desktop Learning Modules” Proceedings of the 2022 ASEE Annual Conference and Exposition, June 26-29, 2022.
  4. Curtis, H., Gartner, J. B., VanWie, B. J., Dutta P., Adesope, O. O., and Watson, C., “Teacher Impact on Student Learning Using LC-DLM Implementations in the Classroom” Proceedings of the 2022 ASEE Annual Conference and Exposition, June 26-29, 2022.
  5. Reynolds, O., Kaiphanliam, K., Oje, O., Khan, A. I., Gartner, J., Dutta, P., Adesope, O., Van Wie, B. J., Thiessen, D. B., and Bryant, K., “Transition of an Interactive, Hands-on Learning Tool to a Virtual Format in the Covid-19 Era” Proceedings of the 2021 ASEE’s Virtual Conference, July 26 -29, 2021.
  6. Van Wie, B. J., Bryant, K. N., Reynolds, O., Kaiphanliam, K., Khan, A. I., Oje, O., Dutta, P., Adesope, O., Gartner, J., and Thiessen, D. B., “Progress in the Nationwide Dissemination and Assessment of Low-Cost Desktop Learning Modules and Adaptation of Pedagogy to a Virtual Era” Proceedings of the 2021 ASEE’s Virtual Conference, July 26 -29, 2021.
  7. Oje, O., Adesope, O., Wong, R. M., Van Wie, B. J., and Dutta, P., “Hands-on in Engineering Classrooms: A Comparison of Online versus Face-to-Face Delivery” Proceedings of American Educational Research Association Conference, Orlando, FL April 9-12, 2021.
  8. Dahlke, K., Van Wie, B.J., Gartner, J.B., Adesope, O., Dutta, P., and Thiessen, D.B., “Faculty Feedback on Hub-based Approach to National Dissemination of Low-cost Desktop Learning Modules” Proceedings of the 2020 ASEE’s Virtual Conference, June 22-26, 2020.
  9. Dahlke, K., Kaiphanliam, K.M., Van Wie, B.J., Thiessen, D.B., Dutta, P., Adesope, O., Reynolds, O., Khan, A.I., Gartner, J.B., and Oje, O. “A First-year Progress Report on Collaborative Research using Low -cost Desktop Learning Modules to Educate Diverse Undergraduate Communities in Engineering” Proceedings of the 2020 ASEE’s Virtual Conference, June 22-26, 2020.
  10. Pour, N.B., Thiessen, D.B., Van Wie, B.J., Kaiphanliam, K.M., Khan, A.I., Dutta, P., Reynolds, O., Dahlke, K., Adesope, O., Oje, O., and Gartner, J.B. “Design Philosophy and System Integrity for Propagation of Hands-on Desktop Learning Modules for Fluid Mechanics and Heat Transfer” Proceedings of the 2020 ASEE’s Virtual Conference, June 22-26, 2020.
  11. Reynolds, O., Kaiphanliam, K.M., Khan, A.I., Pour, N.B., Dahlke, K., Thiessen, D.B., Gartner, J.B., Adesope, O., Dutta, P., and Van Wie, B.J., “Nationwide Dissemination and Critical Assessment of Low-cost Desktop Learning Modules for Engineering: A Systematic, Supported Approach” Proceedings of the 2019 ASEE Annual Conference and Exposition, Tampa, FL, June 15-19, 2019.
  12. Khan, A.I., Kaiphanliam, K., Thiessen, D. B., Van Wie, B., Olusola, A., Dutta, P., Gartner, J. B., Olivia, R., and Pour, N. B., “Using Bloom’s Taxonomy for Transport Phenomena Question Development: A Method to Improve the Assessment of Hands-on Learning Pedagogy,” Proceedings of the 2019 ASEE Annual Conference and Exposition, Tampa, FL, United States of America, June 15-19, 2019.
  13. Hossan, M. R., Morshed, A., Dillon, R., & Dutta, P. (2018, July). Modeling and simulation of electric field guided cell deformation. In AIP Conference Proceedings (Vol. 1980, No. 1, p. 030030). AIP Publishing.
  14. Yoo, K., Liu, J. and Dutta, P., “Free Flow Isoelectric Focusing in Microfluidic Device,” Submitted for publication in the Proceedings of the 2014 ASME International Mechanical Engineering Congress and exposition, Montreal, Canada, November 14-20, 2014.
  15. Yoo, K., Banerjee, S. and Dutta, P., “A Mathematical Model for Li-Air Battery considering Volume Change Phenomena,” Submitted for publication in the Proceedings of the 2014 ASME International Mechanical Engineering Congress and exposition, Montreal, Canada, November 14-20, 2014.
  16. Hossan, M. R., Dutta, P., and Dillon, R., “Numerical Simulation of DC Dielectrophoretic Particle Transport,” Submitted for publication in the Proceedings of the 2014 ASME Fluids Engineering Division Summer Meeting, Chicago, IL, August 3-7, 2014.
  17. Rezanoor, W., and Dutta, P., “Rotation of Spherical Microparticle in Linearly Polarized Sinusoidal Electric Field,” Submitted for publication in the Proceedings of the 2014 ASME Fluids Engineering Division Summer Meeting, Chicago, IL, August 3-7, 2014.
  18. Hossan, M. R., Dillon, R., and Dutta, P., 2013 “Modeling and Simulation of Microscale Bipolar Particle Dynamics in an Applied Electric Field,” Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition (IMECE), San Diego, CA, November 15-21.
  19. Sze, T., Liu, J. and Dutta, P., 2013 “Numerical Modeling of Fluidic Pumping in Micronetworks of Plants,” Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition (IMECE), San Diego, CA, November 15-21.
  20. Hossan, M. R. and Dutta, P., 2013 “An AC Dielectrophoretic Trap for Cellular Assembly,” Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition (IMECE), San Diego, CA, November 15-21.
  21. Yoo, K., Liu, J. and Dutta, P., 2013 “Segregated Parallel Computing for Isoelectric Focusing of Proteins,” Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition (IMECE), San Diego, CA, November 15-21.
  22. Sprague, I.B. and Dutta, P., 2012 “Flow Through Nanoporous Electrodes in Microfluidic Fuel Cell,” Proceedings of the 2012 ASME International Mechanical Engineering Congress and Exposition (IMECE), Houston, TX, November 9-15, 2012.
  23. Hossan, M. R. and Dutta, P., 2012 “Modeling and Simulation of Dielectrophoretc Particle Assembly,” Proceedings of the 2012 ASME International Mechanical Engineering Congress and Exposition (IMECE), Houston, TX, November 9-15, 2012.
  24. Mani, K.B., Hossan, M. R. and Dutta, P., 2012 “Microwave Heating of Multilayered Composite for Bonding,” Proceedings of the 2012 ASME International Mechanical Engineering Congress and Exposition (IMECE), Houston, TX, November 9-15, 2012.
  25. Dutta, P. and Sprague, I., 2011, “Microfluidic Based Laminar Flow Fuel Cell for Portable Power,” Proceedings of the International Conference on Mechanical Engineering 2011, Dhaka, Bangladesh, December 18-20.
  26. Hossan, M. R. and Dutta, P., 2011 “Analytical Solution for Temperature Distribution in Microwave Heating of Rectangular Objects,” Proceedings of the 2011 ASME International Mechanical Engineering Congress and Exposition (IMECE), Denver, CO, November 11-17.
  27. Sprague, I. B. and Dutta, P., 2011 “The Electrode-Electrolyte Interface in Acidic and Alkaline Fuel Cells,” Proceedings of the 2011 ASME International Mechanical Engineering Congress and Exposition (IMECE), Denver, CO, November 11-17.
  28. Hossan, M.R., Jubery, Z.N., Bottenus, D., Dong, W. Dutta, P., and Ivory, C.F., 2011 “Preconcentration of Cardiac Proteins in a Cascade Microchip,” Proceedings of the 2011 ASME International Mechanical Engineering Congress and Exposition (IMECE), Denver, CO, November 11-17.
  29. Schlect, W.D., Vanwie, B.J., Golter, P., Richards, R.F., Adam, J.C., Ater Kranov, A.M., Compere, M. Maurer, E., Davis, D.C., Adesope, O., Law, J.D., Brown, G.R. Dutta, P. Thiessen, D.B., Abdul, B., 2011, “Multi-Disciplinary Project-Based Paradigm that Uses Hands-On Desktop Learning Modules and Modern Learning Pedagogies”. Proceedings of Annual Conference of American Society for Engineering Education, Vancouver, BC, June 26-30.
  30. Hossan, M. and Dutta, P., 2010, “Analytical Investigation of Microwave Heating,” Proceedings of 2010 ASME International Mechanical Engineering Congress and Exposition (IMECE), Vancouver, British Columbia, Canada, November 12-18.
  31. Sprague, I.B. and Dutta, P., 2010 “Diffuse effects in Microfluidic Fuel Cell,” Proceedings of 2010 ASME International Mechanical Engineering Congress and Exposition (IMECE), Vancouver, British Columbia, Canada, November 12-18.
  32. Jubery, Z.N., Dutta, P., Prabhu, A, Kim, M, 2010 “Modeling and Simulation of Translocation Phenomena in a Solid State Nanopore for nanoparticle Separation, Proceedings of 2010 ASME International Mechanical Engineering Congress and Exposition (IMECE), Vancouver, British Columbia, Canada, November 12-18.
  33. Shim, J, Dutta, P., and Ivory, C.F., “Modeling and Simulation of pH Dependent Isotachophoresis in 2D Microchips,” Proceedings of 2009 ASME International Mechanical Engineering Congress and Exposition (IMECE), Lake Buena Vista, FL, November 13-19.
  34. Prabhu, A, Mulero, R., Kim, M, Jubery, Z.N., and Dutta, P., “High Throughput Nanofluidic Architectures for Nanoparticle Separation,” Proceedings of 2009 ASME International Mechanical Engineering Congress and Exposition (IMECE), Lake Buena Vista, FL, November 13-19.
  35. Jubery, Z.N., Dutta, P., Bottenus, D., and Ivory, C.F., “Preconcentration of Cardiac Proteins in a Microfluidic Device,” Proceedings of 2009 ASME International Mechanical Engineering Congress and Exposition (IMECE), Lake Buena Vista, FL, November 13-19.
  36. Schwarzkopf, J, Crowe, C.T., and Dutta, P., “A k-epsilon model for Particle Laden Turbulent Flow,” Proceedings of 2009 ASME Fluids Engineering Division Summer Meeting, Vail, CO, August 2- 6.
  37. Schwarzkopf, J, Crowe, C.T., and Dutta, P., “A Turbulence Dissipation Model for Multiphase Flows,” Proceedings of 2008 ASME International Mechanical Engineering Congress and Exposition (IMECE), Boston, MA, October 31-November 6.
  38. Shim, J, Dutta, P., and Ivory, C.F., “Isoelectric Focusing of Proteins in a Horseshoe Microchannel,” Proceedings of 2008 ASME International Mechanical Engineering Congress and Exposition (IMECE), Boston, MA, October 31-November 6.
  39. Cui, H, Dutta, P., and Ivory, C.F., “An Automated Non-mechanical Valve for Dispersion Control in On-chip Electrophoresis,” Proceedings of 2007 ASME International Mechanical Engineering Congress and Exposition (IMECE), Seattle, WA, November 11-15.
  40. Wang, Y, Zhe, J, Chung, B. T.F., and Dutta, P., “Magnetic Particle Driven Micromixer,” Proceedings of 2007 ASME International Mechanical Engineering Congress and Exposition (IMECE), Seattle, WA, November 11-15.
  41. Schwarzkopf, J, Crowe, C.T., and Dutta, P., “Modeling of Multiphase Flow Boiling in Meso and Microchannel,” Proceedings of 2007 ASME International Mechanical Engineering Congress and Exposition (IMECE), Seattle, WA, November 11-15.
  42. Shim, J., Dutta, P., and Ivory, C.F., “Modeling and Simulation of Isotachophoresis in Microchips,” Proceedings of 2007 ASME International Mechanical Engineering Congress and Exposition (IMECE), Seattle, WA, November 11-15.
  43. Zhe, J., Jagtiani, A., Dutta, P., Hu, J., and Carletta, J., “ A High Throughput Microfluidic Bioparticle Sensor,” Proceedings of 14th International Conference on Solid State Sensors, Actuators, and Microsystems, Lyon, France, June 10-14, 2007.
  44. Dutta, P. and Horiuchi, K., 2006, “Field Effect Flow Control in Complex Microgeometries,” Proceeding of the 10th Annual European Conference on Micro and Nanoscale Technologies for the Biosciences, Montreux, Switzerland, November 14-16.
  45. Horiuchi, K., and Dutta, P., 2006, “Local Flow Control using Field Effect Transistors,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition (IMECE), Chicago, IL, November 5-10.
  46. Huda, N. and Dutta, P., 2006, “Platinum Microelectrodes in Polymeric Microfluidic Chips: A New Fabrication Approach,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition (IMECE), Chicago, IL, November 5-10.
  47. Dutta, P. and Salgado, J.D., 2006, “A Conductivity Based Microfluidic Flow Sensor,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition (IMECE), Chicago, IL, November 5-10.
  48. Jagtiani, A., Zhe, J., Dutta, P., Hu, J., and Carletta, J., 2006, “A Microfluidic Based High Throughput Resistive Pulse Sensor,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition (IMECE), Chicago, IL, November 5-10.
  49. Dutta, P., Horiuchi, K., Cui, H., and Ivory, C.F., 2005, “Multistage Isoelectric Focusing: A Novel On-chip Bioseparation Technique,” Proceedings of 2005 ASME International Mechanical Engineering Congress and Exposition (IMECE), Orlando, FL, November 5-11.
  50. Horiuchi, K. and Dutta, P., 2005, “Heat Transfer Characteristics of Mixed Electroosmotic and Pressure Driven Flows under Constant Heat Flux,” Proceedings of 2005 ASME International Mechanical Engineering Congress and Exposition (IMECE), Orlando, FL, November 5-11.
  51. Wang, Y., Zhe, J., Dutta, P., and Cheng, G.C., 2005, “A Hybrid Rapid Microfluidic Mixer Utilizing Electrokinetic Relay and Asymmetric Flow Geometries for Lab-on-a-Chip Applications,” Proceedings of 2005 ASME International Mechanical Engineering Congress and Exposition (IMECE), Orlando, FL, November 5-11.
  52. Horiuchi, K. and Dutta, P., 2005, “Thermal Analysis of Electrokinetic Flows in Planar Microchannel,” Proceedings of 2005 JSME Mechanical Engineering Congress (MECJ-05), Chohu city, Tokyo, September 19-22.
  53. Horiuchi, K. and Dutta, P. 2005 “Flow Diagnosis in a Trapezoidal Microchannel,” Proceedings of Annual Meeting of Japan Society of Fluid Mechanics, paper# AM05-07-002, September 5-7.
  54. Horiuchi, K., Dutta, P., Cui, H., and Ivory, C.F., 2004, “Band Deformation at a T-Junction While Electrofocusing in a Dog-Leg Microchannel,” Proceedings of 2004 International Mechanical Engineering Congress and Exposition (IMECE), Anaheim, CA, Nov. 13-19.
  55. Horiuchi, K. and Dutta, P., 2004, “Thermal Analysis of Mixed Electroosmotic and Pressure Driven Flows in Two Dimensional Straight Microchannels,” Proceedings of 2004 ASME Summer Heat Transfer/Fluid Mechanics Conference, Charlotte, NC, July 11-15.
  56. Salgado, J.D., Horiuchi, K., and Dutta, P., 2004, “Development of a Microfluidic Flow Sensor in Polymeric Microchip,” Proceedings of 2004 ASME Summer Heat Transfer/Fluid Mechanics Conference, Charlotte, NC, July 11-15.
  57. Cui, H., Ivory, C.F., Horiuchi, K., and Dutta, P., 2004, “Isoelectric Focusing in a Polymeric Micro-fluidic Chip,” Proceedings of 227th American Chemical Society National Meeting, Anaheim, CA, March 28-April 1.
  58. Horiuchi, K., Dutta, P., Cui, H., and Ivory, C.F., 2003, “High Resolution Separation of Proteins in Polymeric Micro-fluidic Chip,” Proceedings of 2003 International Mechanical Engineering Congress and Exposition (IMECE), Washington, DC, Nov. 15-21.
  59. Horiuchi, K. and Dutta, P., 2003, “Heat Transfer Characteristics of Steady Electroosmotic Flows in Two Dimensional Straight Microchannels,” Proceedings of 2003 ASME Summer Heat Transfer Conference, Las Vegas, NV, July 20-23.
  60. Dutta, P. and Beskok, A., 2001, “Analysis of Time Periodic Electroosmotic Flows,” Proceedings of 2001 International Mechanical Engineering Congress and Exposition (IMECE), New York, NY, Nov. 11-16.
  61. Dutta, P., Kim, M.J., Kihm, K.D., and Beskok, A., 2001, “Electroosmotic Flow in a Grooved Micro-Channel Configuration: A Comparative Study of Micro-PIV Measurements and Numerical Simulations,” Proceedings of 2001 International Mechanical Engineering Congress and Exposition (IMECE), New York, NY, Nov. 11-16.
  62. Dutta, P. and Beskok, A., 2000, “Electroosmotic Flow Control in Complex Micro Geometries,” Proceedings of 2000 International Mechanical Engineering Congress and Exposition (IMECE), Orlando, FL, Nov. 5-12.
  63. Dutta, P., Warburton, T. C., and Beskok, A., 1999, “Numerical Modeling of Electroosmotically Driven Micro Flows,” Proceedings of 1999 International Mechanical Engineering Congress and Exposition (IMECE), Nashville, TN, Nov. 16-21.
  64. Dutta, P., Dutta, S., and Khan, J.A.,1998, “Internal Cooling Heat Transfer Enhancement by using Periodic Baffles in the Flow Path,” Proceedings of 1998 International Gas Turbine Institute Congress and Exposition, Stockhom, Sweden, Jun 2-4.
  65. Dutta, S., Dutta, P., Jones, R.E., and Khan, J.A., 1997, “Experimental Study of Heat Transfer Coefficient Enhancement with Solid and Perforated Baffles,” Proceedings of 1997 International Mechanical Engineering Congress and Exposition (IMECE), Dallas, TX, Nov. 16-21.