Skip to main content Skip to navigation

Publications

Refereed Journal Articles

    1. Khawarizmi, R., Kwon, P., Sayem, M. A., Han, Y., Kim, D., (2021) “The effect of carbon fiver types on tool wear during edge trimming of 0°, 45°, 90°, and 135° carbon fiber reinforced plastic laminates,” ASME Transactions Journal of Manufacturing Science and Engineering, Under review.
    2. Olson, W. M., Kim, D. “An Exploratory Study of Far Transfer: Understanding Writing from First-Year Composition to Engineering Writing-in-the Major Courses,” Writing Across the Disciplines, Under review.
    3. Svinth, C. N., Wallace, S., Stephenson, D. B., Kim, D., Shin, K., Kim, H.-Y., Kim, T.-G., “Identifying abnormal CFRP holes using both unsupervised and supervised learning techniques on in-process force, current, and vibration signals,” International Journal of Precision Engineering and Manufacturing, Under review.
    4. Dey, M., Kim, D., Tan, H. “Finite Element Parametric Study on Residual Stresses and Pulling Force of Split Sleeve Cold Expansion,” Journal of Mechanical Engineering Science, In press.
    5. Bin Abdullah, Md. S., Kim, D., Kwon, P. Kim, T.-G., “Effect of Cutting Edge Geometry Change due to Tool Wear on Hole Quality in Drilling of Carbon Fiber Reinforced Plastics (CFRP) using Advanced Ceramic Coated Tools.” Journal of Mechanical Engineering Science, In press.
    6. Kim, D., He, B., Swan, S., Kim, T.-G., Lee, S.-W., (2020) “A Study on the Machiniability of Advanced Arc PVD AlCrN-Coated Carbide Tools in Drilling of CFRP/Titanium Alloy Stacks,” Carbon Letters. https://doi.org/10.1007/s42823-020-00180-8.
    1. Nguyen, D., Mohammad Sayem, B. A., Kim, D., Kwon, P., (2020) “The Effect of Fiber Orientation on Tool Wear in Edge-Trimming of Carbon Fiber Reinforced Plastics (CFRP) Laminates,” Wear, 450-451, 203213 (online version).
    2. Kim, D., and Olson, W., (2020) “Using a Writing-transfer Focused Pedagogy to Improve Undergraduates’ Lab Report Writing in Gateway Engineering Laboratory Courses,” IEEE Journal of Technical Communications, 63 (1), 64-84.
    1. Nguyen, D., Voznyuk, V. , Mohammad Sayem, B. A. , Kim, D., Kwon, P. (2018) “Tool wear of superhard ceramic coated tools in drilling of CFRP/Ti stacks,” ASME Transactions Journal of Manufacturing Science and Engineering, 140(11), 111018 (10 pages).
    2. Kim, S., Kim, D. (2018) “Interference-fit Effect on Improving Bearing Strength and Fatigue Life in a Pin-Loaded Woven Carbon Fiber Reinforced Plastic Laminate,” ASME Transactions Journal of Engineering Materials and Technology, 141(2), 021006.
    3. McNeal, J. S., Jones, J. , Cal, R., B. Mastin, L. B., Kim, D., Solovitz, S. (2018) “Experimental study of analogue vent erosion towards nozzle shapes,” Journal of Volcanology and Geothermal Research, 367, 79-87.
    4. Garate, J., Kim, D., Solovitz, S. (2018) “Fabrication and Performance of Segmented Thermoplastic Composite Wind Turbine Blades,” International Journal of Precision Engineering and Manufacturing – Green Technology, 5(2), 271-277.
    5. Swan, S., Mohammad Sayem, B. A., Kim, D., Nguyen, D., Kwon, P., (2018) “Tool wear of advanced coated tools in drilling of CFRP,” Journal of Manufacturing Science and Engineering, 140(11) 111018.
    6. Swan, S., Yuksel, T., Kim, D., Gurocak, H. (2017) “Automation of the Vacuum Assisted Resin Transfer Molding Process for Recreational Composite Yachts,” Polymer Composites, 38(11), 2411-2424.
    7. Kim, D., Beal, A., Kang, K., and Kim, S. (2017). “Hole quality assessment of drilled CFRP and CFRP-Ti stacks holes using polycrystalline diamond (PCD) tools,” Carbon Letters, Vol. 23, pp. 1-8.
    8. Paul, B., Panat, R.P., Mastrangelo, C., Kim, D., & Johnson, D. (2016) “Manufacturing of Smart Goods: Current State, Future Potential and Research Recommendations,” ASME Transactions Journal of Micro and Nano-Manufacturing.  4(4), 044001.
    9. Cho, D.-Y., Swan, S., Kim, D., Cha, J.-H., Ruy,W.-S., Choi, H.-S., and Kim, T.-S., (2016) “Development of paint area estimation software for ship compartments and structures,” International Journal of Naval Architecture and Ocean Engineering, Vol 8, Issue 2, pp. 198-208. Best paper award
    10. Alizadeh Ashrafi, S., Miller, P. , Wandro, K. , and Kim, D., (2016) “Characterization and Effects of Fiber Pull-Outs in Hole Quality of Carbon Fiber Reinforced Plastics Composite,” Materials, Vol 9, No 10, pp. 828-840.
    11. Kim, S., He, B., D. Kim, C. Shim, H. Song. (2016) Bearing strength of interference-fit pin joined glass fiber reinforced plastic composites. Journal of Composite Materials. Published Online. DOI: https://doi.org/10.1177/0021998316636462
    12. Kim D., Beal, A., Kwon. P. (2015) “Effect of Tool Wear on Hole Quality in Drilling of Carbon Fiber Reinforced Plastic-Titanium Stacks Using Tungsten Carbide and PCD Tools,” Journal of Manufacturing Science and Engineering, Vol. 138 (3), pp. 031006.
    13. Kim, S., Shim, C., Startevant, C., Kim, D., H. Song, (2014) “Mechanical Properties and Production Quality of Hand-layup and Vacuum Infusion Processed Hybrid Composite Materials for GFRP Marine Structures,” International Journal of Naval Architecture and Ocean Engineering, Vol. 6, No. 3, pp. 723–736.
    14. Kwon, P., Wang, X., Sturtevant, C., Kim, D., Lantrip, J., (2014) “Comparative tool wear study based on drilling experiments on CFRP/Ti stack and its individual layers,” Wear, Vol. 317 (1-2), pp. 265-276.
    15. Solovitz, S. A., Ogden, D. E., Kim, D., and Kim, S., (2014) “Coupled Fluid and Solid Evolution in Analogue Volcanic Vents,” Journal of Geophysical Research, Vol. 119, doi:10.1002/2014JB010993.
    16. Kim, D., Beal, A., Park, K., Kwon, P., and Lantrip, J., (2013) “A Comparative Study of Carbide Tools in Drilling of CFRP and CFRP-Ti Stacks,” ASME Transactions Journal of Manufacturing Science and Engineering, Vol 136, No 1, 014501.
    17. Wang, X., P. Kwon, D. Schrock, D. Kim, (2013) “Friction coefficient and sliding wear of AlTiN coating under various lubricated conditions,” Wear, Vol. 304, 67-76.
    18. Kim S., He, B., Shim, C., and Kim, D., (2013) “An experimental and numerical study on the interference-fit pin installation process for cross-ply glass fibre reinforced plastics (GFRP),” Composites B: Engineering, Vol. 54, pp. 153–162.
    19. Kim, D., Sturtvant, C., and Ramulu, M. (2013) “Usage of PCD tool in drilling of Titanium/Graphite Hybrid Composite Laminate,” International Journal of Machining and Machinability of Materials. 13(2/3): 276-288.
    20. Wang, X., Kwon, P., Sturtvant, C., Kim, D., & Lantrip, J. (2013) “Tool wear of coated drills in drilling CFRP,” Journal of Manufacturing Processes, 15, pp. 127-135.
    21. Kim S., Hennigan, D., Kim, D., Seok, C. (2012) “Fatigue enhancement by interference-fit in a pin-loaded glass fiber reinforced plastics laminate,” Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science. 226(6): 1437-1446.
    22. Park, K., Kwon, P., Kim, D., and Beal, A. (2012) “Characteristics on BAM coated carbide tool in drilling of composite/titanium stack,” International Journal of Precision Engineering and Manufacturing, 13(7), pp 1073-1076.
    23. Kim, S., Hennigan, D., and Kim, D. (2012) “Influence of Fabrication and Interference-Fit Techniques on Tensile and Fatigue Properties of Pin-Loaded Glass Fiber Reinforced Plastics (GFRP) Composites,” ASME Transactions Journal of Engineering Materials and Technology, 134, pp. 041012.
    24. Park, K., Kwon, P., Beal, A., Kim, D., Lantrip, J., (2011) “Tool wear in drilling of composite/titanium stacks with carbide and polycrystalline diamond tools,” Wear, 271(11-12): 2826-283.
    25. Kim, S., Goo, J., Kim, D., & Seok, C. (2011) “Prediction of the Static Fracture Strength of Hole Notched Plain Weave CFRP Composites,” Composites Science and Technology, 71(14): 1671-1676.
    26. Kim D., Kim, Y., Gururaja, S., Ramulu, M. (2010) “Processing and Fiber Content Effects on the Machinability of Compression Moulded Random Direction Short GFRP Composites,” International Journal of Automotive Technology, 11(6): 849-855.
    27. Kim D., Hennigan, D., Beavers, K. (2010) “Effect of fabrication processes on mechanical properties of glass fiber reinforced polymer composites for 49 meter (160 foot) recreational yachts,” International Journal of Naval Architecture and Ocean Engineering, 2(1): 45-56.
    28. Park, K., Kwon, P., Castro, G., Kim, D., Lantrip, J., (2010) “Preliminary study on tool wear in drilling of composites/titanium stacks with carbide and PCD tools” Transactions of the North American Manufacturing Research Institution of SME, Vol. 38, 283-290.
    29. Kim, D., Chen. X., Allen, P., (2010) “Micro-Electrical Discharge Drilling Characteristics on Molybdenum Aperture Fabrication,” International Journal of Machining and Machinability of Materials, 7(3/4):179-193.
    30. Sun, L., Kim, Y., Kim, D., & Kwon, P. (2009) “Densification and Properties of 420 Stainless Steel Produced by Three-Dimensional Printing with Addition of Si3N4 Powder,” ASME Transactions Journal of Manufacturing Science and Engineering. 131, 061001.
    31. Lee, J., Kim, D., Li, W., (2009) “Process Modeling and Experimentation of a Cordless Resistance Soldering System,” the International Journal of Advanced Manufacturing Technology, (4):428-438.
    32. Sun, L., Kwon, P., Kim, Y., & Kim, D. (2009) “Densification and dimensional accuracy of metal matrix composites fabricated by three dimensional printing,” Transactions of the North American Manufacturing Research Institution of SME, Vol 37.
    33. Jang, J., Kim, D., (2008) “Re-cold Expansion Process Simulation to Impart the Residual Stresses around Fastener Holes in 6061 A-T6 Aluminum Alloy,” Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 222, No.11, pp.1325-1332.
    34. Wan, Y., Kim, D., Park, Y., Joo, S., (2008) “Experimental Investigation of the Machinability of Polymethylmethacrylate (PMMA)/Multi-Walled Carbon Nanotube (MWCNT) Nanocomposites in Micro Electro Discharge Machining,” Advanced Composite Letters, 17(4), 115-123.
    35. Kim, D., Blake, D., Kim, B.-J., Kim, M.-H., and Lim, B.-S., (2008) “Fatigue Enhancement of Post-weld Cold Worked Low Carbon Steel Resistant Spot Welds in Automotive Body Applications,” Proceedings of the Institution of Mechanical Engineers, Part D, Journal of Automotive Engineering. 222(9), 1625-1632.
    36. Sun, L., Kwon, P., Kim, D., Beavers, K., (2008) “Progress toward a Denser Metal Matrix Composite Using Three Dimensional Printing Method,” Transactions of NAMRI/SME Vol. 36, pp. 105-112.
    37. Jang, J., Kim, D., Cho, M., (2008) “The Effect of Cold Expansion on the Fatigue Life of the Chamfered Holes,” ASME Transactions Journal of Engineering Materials and Technology, Vol. 130, pp. 031014.
    38. Ramulu, M., Kim, D., Kao, H., Rao, P. N., (2008) “Experimental Modeling and Analysis of Drilling (Al2O3)p/6061 Metal Matrix Composites Using PCD Tool,” International Journal of Materials and Product Technology, Vol. 32, No. 1, pp. 20-41.
    39. Shin H., J. Lee, S. Kim, I. Choi, Y. Shon, Y. An, D. Kim. (2007) “A Study on the Effect Analysis Influenced on the Advanced System of Moving Object,” Journal of the Korean Institute of Illuminating and Electrical Installation Engineers Vol. 21, No. 8, pp. 87-95. (In Korean)
    40. Lee Y., Kim, D., Yu, J., Hwang, S., Kim, H. (2007) “Implementing Instructional Modules for Engineering Ethics into Engineering Curricula,” Journal of Engineering Education Research, 10(4), pp. 78-92. (In Korean)
    41. Blake, D., Kim, D., (2007) “Effect of Weld Quality on Fatigue Life of Post-Weld Cold Worked 1008 Resistance Spot Weld Joints,” Transactions of NAMRI/SME, Vol 35, pp. 327-334.
    42. Kim, D., Ramulu, M., (2007) “Study on the drilling of Titanium/Graphite Hybrid Composites,” ASME Transactions Journal of Engineering Materials and Technology, Vol. 129, pp. 390-396.
    43. Kim, D., Blake, D., Ryu, S.-J., Lim, B.-S., (2007) “A Study on Fatigue Strength Improvement of Aluminum Alloy Resistant Spot Welds by Cold Working,” Materials Science Forum, Vols 539-543, pp. 3961-3966.
    44. Kim, D., Xu, J., Li,W., Blake, D., (2006) “Force Characteristics of Self-Piercing Riveting,” Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 220, No. 8, pp.1259-1266.
    45. Kim, D., Allen, P., Shin, H., Nam, T., (2006) “Effect of Cold Working on Exit Burr Formation in Drilling,” Transactions of NAMRI/SME, Vol. 34, pp.317-324.
    46. Lim, B, Ryu, S., Blake, D., Kim, D., (2006) “Improvement of Fatigue Life in Post-weld Cold Worked Aluminum Resistant Spot Welds,” International Journal of Automotive Technology, Vol. 7, No.5, pp 579-584.
    47. Seo, Y., Kim, D., Ramulu, M., (2006) “Electrical Discharge Machining of Functionally Graded 15 – 35 Vol% SiCp/Al Composites,” Materials and Manufacturing Processes, Vol. 21, pp. 475-483.
    48. Kim, D., Spitsen, R., Li, W., Lim, B., (2005) “The Feasibility Study of Post-Weld Cold Working Processes to Improve the Fatigue Strength of Aluminum Resistance Spot Welds,” Transactions of NAMRI/SME, Vol. 33, pp.251-258.
    49. Kim, D., Ramulu, M., Pedersen, W., (2005) “Machinability of Titanium/Graphite Hybrid Composites in Drilling,” Transactions of NAMRI/SME, Vol. 33. pp. 445-452.
    50. Lim, B. S., Kim, B. J., Kim, D., Kim, J. W., and Lee, D. B., “Influence of Dwell Time on Creep-Fatigue Crack Growth Behavior of P92 Steel Weldment at High Temperature,” Key Engineering Materials, Vol. 297-300, Part 1-4, pp.794-798, 2005.
    51. Spitsen, R., Kim, D., Flinn, B., Ramulu, M., and Easterbrook, E.T., (2005) “The Effects of Post-Weld Cold Working Processes on the Fatigue Strength of Low Carbon Steel Resistance Spot Welds,” ASME Transactions Journal of Manufacturing Science and Engineering, Vol 127, pp.718-723.
    52. Kim, D., Doan, X. and Ramulu, M., (2005) “Drilling Performance and Machinability of PIXA-M and PEEK Thermoplastic Composites,” Journal of Thermoplastic Composite Materials, Vol. 18, No. 3, pp. 195-217.
    53. Kim, D., and Ramulu, M., (2004) “Frequency Analysis and Process Monitoring in Drilling of Composite Materials,” Advanced Composites Letters, Vol. 13, No. 4, pp. 185-192.
    54. Seo, Y.W., Kim, D.W. and Ramulu, M., (2004) Surface Characteristics of Abrasive Waterjet Machined Titanium Alloy, Journal of Jet Flow Engineering, Vol. 21, No. 2, pp.13-21.
    55. Ramulu, M., Stickler, P.B., McDevitt, N.S., Datar, I.P., Kim, D., and Jenkins, M.G., (2004) “Influence of Processing Methods on the Tensile and Flexture Properties of High Temperature Composites,” Composite Science & Technology, Vol. 64, pp. 1763–1772.
    56. Kim, D., Ramulu, M. (2004) “Cryogenically Treated Carbide Tool Performance in Drilling Thermoplastic Composites,” Transactions of NAMRI/SME, Vol. 32, pp. 79-85.
    57. Ramulu, M., Kuo, S.-Y., Chen, Y.-M., Kim, D., Spitsen, R., (2004) “Cutting Characteristics of Preform and SMC Composites,” Transactions of NAMRI/SME, Vol. 32, pp. 239-246.
    58. Kim, D., and Ramulu, M., (2004) “Drilling Process Optimization for Graphite/Bismaleimide- Titanium Alloy Stacks,” Composite Structures, Vol. 63, pp. 101-114.
    59. Seo, Y., Ramulu, M., and Kim, D., (2003) “Machinability of Ti alloys on the Abrasive Waterjet Machining Process,” Proceedings of the Institution of Mechanical Engineers, Part B Journal of Engineering Manufacture, Vol. 217, pp. 1709 – 1721.
    60. Kim, D., Seo, Y.W., Ramulu, M., and Pedersen, E. W., (2003) “EDM Characteristics of 15 and 35 Vol.% SiCp/Al Metal Matrix Composites,” Transactions of NAMRI/SME, Vol. 31, pp. 241-248.
    61. Ramulu, M., Kim, D., Rao, P.N., and Kao, H., (2003) “Experimental study of (Al2O3)p/6061 Metal Matrix Composites using PCD Tool,” Transactions of NAMRI/SME, Vol. 31, pp. 169-176.
    62. Ramulu, M., Kim, D., and Choi, G., (2003) “Frequency Analysis and Characterization in Orthogonal Cutting of Glass Fiber Reinforced Composites,” Composites A: Applied Science and Manufacturing, Vol. 34, pp.949-962.
    63. Ramulu, M., Branson, T. and Kim, D., (2001) “A Study on the Drilling of Graphite / Bismaleimide Composite and Titanium stacks,” Composite Structures, Vol. 54, No.1, pp.67-77.
    64. Kim, D., and Lim, B., (1999) “Plasma and Vacuum Carburizing Process and Mechanical Properties of SCM415 Steel,” Korean Society of Mechanical Engineers International Journal, Vol. 13, No. 8, pp. 634 – 641.
    65. Kim, D., Kim, S., and Lim, B., (1998) “Surface Hardening Characteristics on Plasma Carburized SCM415 Steel,” Journal of Korea Research Society of Materials, Vol. 8, No. 8, pp. 707-713. (In Korean)

     

    Refereed Conference Papers

    1. Khawarizmi, R., Kwon, P., Sayem, M. A., Han, Y., Kim, D., (2021) “The effect of carbon fiver types on tool wear during edge trimming of 0°, 45°, 90°, and 135° carbon fiber reinforced plastic laminates,” Proceedings of the ASME 2021 16th International Manufacturing Science and Engineering Conference (MSEC2021).
    2. Riley, C., Kim, D., Lulay, K., Lynch, J., StClair, S., (2021) “Investigating the Effect of Engineering Undergraduates’ Writing Transfer Modes on Lab Report Writing in Entry-Level Engineering Lab Courses,” Proceedings of 2021 ASEE Annual Conference and Exhibitions.
    3. StClair, S., Kim, D., Riley, C., (2021) “Undergraduates’ Perspectives on Readiness, Writing Transfer, and Effectiveness of Writing Instructions in Engineering Lab Report Writing,” Proceedings of 2021 ASEE Annual Conference and Exhibitions.
    4. Kim, D., Frye, M., Olson, W., (2021) “Multidimensional Linguistic Analysis of Multiple Undergraduate Writing Samples Collected from Engineering Students in Entry-Level Laboratory Courses at Three Universities,” Proceedings of 2021 ASEE Annual Conference and Exhibitions.
    1. Roy, S., Dey, M., Tan, H., Kim, D., Shultz, M., Elliott, A., Echols, D., (2021) “Perliminary Finite Element Simulations on the Residual Stress Fields and Fatigue Performance of the Cold Expansion Processed Rail Hole in the Rail Joint Structure,” AREMA 2021 Annual Conference & Expo.
    2. Dey, M., Kim, D., Tan, H., (2020) “Effect of friction on residual stress distribution induced by the split sleeve cold expansion process,” Proceedings of the ASME 2020 International Mechanical Engineering Congress and Exposition (IMECE2020), November 15-19, 2020, Portland, Oregon, USA.
    3. Yasin, Md. S., Kim, D., Tan, H., Shultz, M., Elliott, A., Echols, D., (2020) “Fatigue enhancement technologies to extend the life of rail-end bolt holes evaluated through simulation technologies to predict fatigue failure and verified through laboratory testing,” AREMA 2020 Annual Conference & Expo.
    4. Kim, D., Lynch, J., (2020) “Perspectives and practices of undergraduate/graduate teaching assistants on of writing pedagogical knowledge and lab report evaluation in engineering laboratory courses.” Proceedings of 2020 ASEE Annual Conference and Exhibitions.
    5. Bin Abdullah, Md. S., Nguyen, D., Kim, D. (2020) “A study of cutting edge geometry change and surface roughness in drilling of carbon fiber reinforced plastics (CFRP) using uncoated and coated tools,” Proceedings of 2020 SAMPE Conference.
    6. Kim, D., Riley, C., Lulay, K., (2019) “Preliminary investigation of undergraduate students’ zone of proximal development (ZPD) in writing lab reports in entry-level engineering laboratory courses at three universities,” The Proceedings of 2019 ASEE Annual Conference and Exposition, Tempa, FL, June 2019. Best Paper Award of the ASEE Division of Experimentation and Laboratory-Oriented Studies
    7. Kim, J., Kim, D., (2019) “How engineering students draw conclusions from lab reports and design project reports at junior-level engineering courses,” The Proceedings of 2019 ASEE Annual Conference and Exposition, Tempa, FL, June 2019.
    8. Nguyen, D., Voznyuk, V., Bin Abdullah, M. S., Kim, D., Kwon, P., (2019) “Tool wear of superhard ceramic coated tools in drilling of CFRP/Ti stacks,” The Proceedings of ASME Manufacturing Science and Engineering Conference MSEC 2019, Erie, PA.
    9. Swan, S., Jones, J., Kim, D., Nguyen, D., Kwon, P., (2018) “Tool wear of advanced coated tools in drilling of CFRP,” The Proceedings of ASME Manufacturing Science and Engineering Conference MSEC 2018, College Station, TX.
    10. Nguyen D., V. Voznyuk, P. Kwon, D. Kim. (2017) “Performance Evaluation of Superhard Coatings in Drilling of Ti-6Al-4V Alloy,” The Proceedings of ASME Manufacturing Science and Engineering Conference MSEC 2017, Los Angeles, CA.
    11. Kim D., W. Olson, K. Wandro, N. Sundararajan, O. Adesope. (2017) Professional development workshop to promote writing transfer between first-year composition and introductory engineering laboratory courses. The Proceedings of 2017 ASEE Annual Conference and Exposition, Columbus, Ohio, June 2017.
    12. Kwon, P., Swan, S., & Kim, D. (2016). Early stage of tool wear with superhard ceramic coated tools in drilling CFRP, Ti, and CFRP/Ti stacks. The Proceedings of SME NAMRC 44, 2016.
    13. Kim, D., Sekhar, P.K. (2016). A Preliminary Study on Supporting Writing Transfer in an Introductory Engineering Laboratory Course. The Proceedings of 2016 ASEE Annual Conference and Exhibition, New Orleans, LA, 2016.
    14. Garate, J., Kim, D., Solovitz, S., (2015) “A Preliminary Study on Glass Fiber Reinforced Thermoplastic Composite Fabrication for Small Wind Turbine Blade,” Proceedings of ASME-IMECE 2015, Houston, TX, USA. 2015.
    15. Kim, D., and Olson, W.M. (2015) Improving student lab report writing performances in materials and manufacturing laboratory courses by implementing a rhetorical approach to writing.  Proceedings of 2015 ASEE Annual Conference and Exhibition, June 14 – 17, 2015, Seattle, WA. 2015.
    16. Kim D., A. Beal, P. Kwon. (2015) “Effect of Tool Wear on Hole Quality in Drilling of Carbon Fiber Reinforced Plastic-Titanium Stacks Using Tungsten Carbide and PCD Tools,” ASME 2015 International Manufacturing Science and Engineering Conference, Charlotte, NC, USA, June 8-12, 2015.
    17. Yuksel, T., Stockton, D., Marshall, P., Gurocak, H., and Kim, D., (2014) “Intelligent resin delivery system development large composite structure manufacturing,” Proceedings of ASME-IMECE 2014, Nov 14-20, 2014, Montreal, Canada. 2014.
    18. Wang, X., Kwon, P., Pelikhatyy, R. , Kim, D., (2014) “Characterization Of Fiber Pull-Outs In Drilled CFRP Holes Using Confocal Laser Microscope,” Proceedings of North American Manufacturing Research Institute 42, Detroit, MI. 2014.
    19. Sturtevant, C., Wang, X., Kim, D., Kwon, P., Lantrip, J., (2013) “Effect of tool wear on hole quality when drilling CFRP with coated tools,” Proceedings of North American Manufacturing Research Institute 41, Madison, WI, June 10-14, 2013.
    20. Lei, N., Chen, Z., Kim, D., Xue, W., & Xu, J. (2012) Mechanical fabrication of graphene devices using focused-ion beam: deposition and milling.  Nanotech Conference & Expo 2012 (Nanotech 2012), pp 502-505, 2012.
    21. Wang, X., Kwon, P., Kim, D., & Sturtevant, C. (2012) Tool Wear of Ultra-Hard Coatings in Drilling CFRP. Proceedings of North American Manufacturing Research Institute 40, South Bend, IN, June 3-8, 2012.
    22. Kim, S., Seok, C., and Kim, D. (2011) A Study of Failure Criterion for Plain Woven CFRP Composites Structure having a Hole Notch.  Proceedings of International Conference on Materials and    Reliability 2011(ICMR-2011), Busan, Korea, Nov. 20-22, 2011.
    23. Kim, S., Seok, C., and Kim, D. (2011) A Study on Variation of Residual Strength of Carbon Fiber Reinforced Plastic Composites with a Hole under Tensile Fatigue Loading.  Proceedings of International Conference on Materials and Reliability 2011(ICMR-2011), Busan, Korea, Nov. 20-22, 2011.
    24. Kim D., A. Beal, K. Park, P. Kwon, J. Lantrip. (2011) A Comparative Study of Carbide Tools In Drilling Of CFRP And CFRP-TI Stacks. ASME 2011 International Manufacturing Science and Engineering Conference, Corvallis, OR, USA, June 13-17, 2011.
    25. Li P., W. Xue, D. Kim, Y. Park. (2011) A Preliminary Study On Machinability Of Polymethylmethacrylate(PMMA)/Multi-Walled Carbon Nanotube(MWCNT) Nanocomposites In Focused Ion Beam Micromachining. ASME 2011 International Manufacturing Science and Engineering Conference, Corvallis, OR, USA, June 13-17, 2011.
    26. Kim Y., Jang, J., Kim, D., T. Nam. (2011) Prediction of crack initiation and crack growth of the split sleeve processed holes in aluminum 2024-T3 using the finite element method. SAMPE Conference 2011, Long Beach, CA, USA, May 23-26, 2011.
    27. Beal A., Kim, D., Park, K-H, Kwon, P., Lantrip, J. (2010) Tool wear and hole quality in drilling of composite/titanium stacks with carbide and PCD tools. Proceedings of SAE 2010 Aerospace Manufacturing and Automated Fastening Conference.
    28. Castro G., Kim, D., Kwon. P. (2010) Influence of tool wear on hole quality in drilling of carbon fiber reinforced plastic-titanium stacks. Proceedings of SAMPE’10 Seattle 2010.
    29. Beavers K., D. Hennigan, D. Kim. (2010) Effect of consolidation processes on mechanical properties of marine composites. Proceedings of SAMPE ’10 Seattle 2010.
    30. Kim D., Li, W., Wogen T.. Biomedical Manufacturing in the Undergraduate Manufacturing/Mechanical Engineering Programs. (2010) Proceedings of 2010 ASEE Annual Conference.
    31. Kim D., Nam, T., Jang, J., Cho, M. (2010) Numerical and experimental study to predict crack initiation and crack growth of the split sleeve processed holes in aluminum 2024-T3. 2010. Proceedings of 2010 Aircraft Airworthiness and Sustainment (AA&S) Conference. Austin, TX, USA.
    32. Bhat, A., Bloomquist, C., Ahn, J., Kim, Y., & Kim, D. (2009). Thermal Transpiration Based Micro-Scale Pumping and Power Generation Devices. The 7th International Energy Conversion Engineering Conference and Exhibit (IECEC) The 7th International Energy Conversion Engineering Conference and Exhibit (IECEC), Denver, CO. http://www.aiaa.org/content.cfm?pageid=230&lumeetingid=1894.
    33. Kim, D., & Kim, Y. (2009). Hands-on Plastic Processing for a Lean Manufacturing Project. Proceedings of ASEE Annual Conference 2009
    34. Chen, X., & Kim, D. (2009). Implementing the Design and Manufacturing Track in a Mechanical Engineering Program. Proceedings of 2009 ASEE Annual Conference and Exhibition
    35. Gurocak, B.H., Chen, X., Jokar, A., & Kim, D. (2009). Assessment of Program Outcomes for ABET Accreditation. Proceedings of 2009 ASEE Conference and Exhibition. Honorable Mention
    36. Kim, D., Shin, S., Jang, J. , (2008) “The Effect of Personality Type on Team Performance in Engineering Materials Term Projects,” Proceedings of ASEE 2008 Annual Conference and Exposition, June 22-25, 2008, Pittsburgh, PA.
    37. Wan, Y., Kim, D., Jang, J. , Park, Y., (2007) “Micro Electrical Discharge Machining of CNT-Based Nanocomposite Materials,” Proceedings of ASME-IMECE, November 11-15, 2007, Seattle, WA.
    38. Jang, J. , Kim, D., Cho, M., (2007) “The Effect of Cold Expansion on the Fatigue Life of the Chamfered Holes,” the Proceedings of ASME-IMECE, November 11-15, 2007, Seattle, WA.
    39. Kim, D., Jang, J. , Ramulu, M., (2007) “Hole Quality in Drilling of Hybrid Titanium Composite Laminate(HTCL),” Proceedings of the American Society for Composites—Twenty-Second Technical Conference, September 17-19, 2007. Seattle, WA.
    40. Park, Y., Kim, D., Wan, Y., Zhang, C., Cook, Y., (2007) “Micro Electrical Discharge Machining of Polymer/Carbon Nanotube Composites,” Proceedings of SAMPE 2007 Spring Conference, June 3-7, 2007, Baltimore, Maryland.
    41. Kim, D., Gurocak, B.H., (2007) “Design Panel: A Tool for Assessment in Design Courses,” Proceedings of ASEE 2007 Annual Conference and Exposition, June 24-27, 2007, Honolulu, HI.
    42. Kim, D., Flaman, M., (2007) “Implementing Machining of Fiber Reinforced Polymer Composites to Manufacturing Courses in 2 Year and 4 Year Programs,” Proceedings of ASEE 2007 Annual Conference and Exposition, June 24-27, 2007,Honolulu, HI.
    43. Jokar, A., Gurocak, B.H., Kim, D., Chen, X., Rad, H., (2007) “Multi-Dimensional and Interactive Learning Model for Introduction to Mechanical Engineering,” Proceedings of ASEE 2007 Annual Conference and Exposition, June 24-27, 2007, Honolulu, HI.
    44. Kim, M., Kim, D., Lim, B., (2006) “Fatigue Life Improvement by Cold Working in Steel Resistant Spot Welds for Automotive Body Applications,” Proceedings of Korean Society of Automotive Engineers 2006 Spring Conference (In Korean).
    45. Kim, D., Blake, D., Ryu, S., Lim, B., (2006) “A Study on Fatigue Strength Evaluation in Aluminum Spot Welds by Cold Working,” Proceedings of International Conference on Processing and Manufacturing of Advanced Materials, July 4-8, 2006, Vancouver, Canada.
    46. Kim, D., Jewett, J., (2006) “Collaborative Class Projects between the Manufacturing Engineering Program and the Child Development Program,” Proceedings of 2006 Society of American Engineering Education Annual Conference & Exposition, Chicago, IL.
    47. Kim, B., Ryu, S., Lim, B., Kim, D., (2005) “Study of Fatigue Behavior in Post-Weld Cold Worked Aluminum Spot Welds” Proceedings of Korean Society of Automotive Engineers 2005 Fall Conference (In Korean).
    48. Kim, D., Ramulu, M., (2005) “Study on the Drilling of Titanium/Graphite Hybrid Composites,” Proceedings of ASME IMECE 2005, November 5-11, 2005, Orlando, FL.
    49. Allen, P., Chen, X., Kim, D. (2005) “Numerical and Experimental Study on Micro-Electrical Discharge Micromachining Characteristics on Molybdenum,” Proceedings of ASME IMECE 2005, November 5-11, 2005, Orlando, FL.
    50. Kim, D., Ramulu, M., (2005) “Cutting and Drilling Characteristics of Hybrid Titanium Composite Laminate (HTCL)” Proceedings of SAMPE 2005/Seattle, October 31-November 3, Seattle, Washington.
    51. Ramulu, M., Parafitt, L.C., Stickler, P. B. and Kim, D., (2005) “Influence of Manufacturing Process and Fiber Volume on Edge Finishing Characteristics and Surface Integrity of Glass Fiber Reinforced Plastic Composites,” Proceedings of SAMPE 2005, October 31-November 3, Seattle, Washington.
    52. Lim, B, Ryu, S., Kim, D.,(2005) “Improvement of Fatigue Strength in Al Alloy Spot-welds by Cold Working,” Proceedings of the 13th International Pacific Conference on Automobile Engineers 2005.
    53. Kim, D., Chen, X., Gurocak, H., (2005) “Outreach Program with Summer Camps and Engineering Workshops,” Proceedings of 2005 Society of American Engineering Education Annual Conference & Exposition, Portland, OR.
    54. Kim, D., Stoebe, T., Cossette, I., (2005) “Manufacturing Technology Curriculum Research and Development for High Schools and Colleges in Washington State,” Proceedings of 2005 Society of American Engineering Education Annual Conference & Exposition, Portland, OR.
    55. Flinn, B., Spitsen, R., Kim, D., Nam, T., Easterbrook, E.T., (2005) “Fatigue Strength Improvement of Low Carbon Steel Resistance Spot Welds by the StressWaveTM Process,” SAE Technical Paper 2005-01-0903.
    56. Spitsen, R., Kim, D., Flinn, B., Ramulu, M., and Easterbrook, E.T., (2004) “The Effects of Post-Weld Cold Working Processes on the Fatigue Strength of Low Carbon Steel Resistance Spot Welds,” Proceedings of ASME IMECE 2004, November 13-19, 2004, Anaheim, CA.
    57. Ramulu, M., Stickler, P., Kim, D. (2004) “Influence of Manufacturing Process and Fiber Volume in Edge Finishing Characteristics of GFRP Composites,” Proceedings of 11th US-Japan Conference on Composite Materials, September 9-11, 2004, Yamagata University, Yonezawa, Yamagata, Japan.
    58. Kim, D. and Cossette, I., (2004) “An Outreach Program to Promote Manufacturing Careers to Underrepresented Students,” Proceedings of 2004 American Engineering Education Annual Conference & Exposition, Salt Lake City, UT.
    59. Seo, Y.W., Kim, D., and Ramulu, M., (2003) “Abrasive Waterjet Machined Surface Characteristics of Titanium Alloy (Ti6Al6V),” Proceedings of the 7th Pacific Rim International Conference on Water Jetting Technology, pp. 331-340, 2003.
    60. Kim, D., Ramulu, M., (2002) “Process Optimization on the Drilling of Composite and Titanium Stacks,” Proceedings of ESDA2002: 6th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 8-11, 2002.
    61. Kim, D., Ramulu, M., (2002) “Effects of Processing Methods on the Drilling Performance of PIXA-M Thermoplastic Composites,” Proceedings of ESDA2002: 6th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 8-11, 2002.
    62. Kim, D., Ramulu, M., and Garbini, J., (2001) “Hole Quality in Drilling of Graphite/Bismaleimide-Titanium Stacks,” Proceedings of the 33rd International SAMPE Technical Conference, pp. 1315-1326, 2001.
    63. Ramulu, M., Branson, T. and Kim, D., (2000) “An Investigation on the Drilling of Graphite / Bismaleimide Composite and Titanium Stacks,” Proceedings of ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, Nov. 5 – 10, 2000.
    64. Kim, D., Kim, H., Kim, M., and Lim, B., (1999) “Plasma and Vacuum Carburizing Process and Mechanical Properties of SCM415 Steel,” Proceedings of the 10th International Pacific Conference on Automobile Engineers, Vol.1, pp. 31-36, 1999.
    65. Kim, D., Lim, B., (1998) “Surface Hardening Characteristics on Plasma Carburized SCM415 Steel,” Proceedings of Korea Research Society of Materials ’98 Spring Conference, Vol. 1, p. 34, 1998. (In Korean)
    66. Kim, D., Lee, Y., and Lim, B., (1998) “A Study on Mechanical Properties of Vacuum Carburized SCM415 Steel,” Proceedings of Korea Society of Automobile Engineers ’98 Spring Conference, Vol. 2, 743-748, 1998. (In Korean)

     

    Refereed Conference Abstracts/Presentations

    1. Han, Y., Kim, D., (2020) Influences of the Mechanical Properties of Carbon Fibers on Tool Wear of Tungsten Carbide End Mills in the Edge Trimming Process of Carbon Fiber Reinforced Plastic (CFRP) Laminates, ASME IMECE Conference, Portland, OR, 2020.
    2. Avhad, A., Tan, H. and Kim, D. (2017) Importance of Powder Droplet Interaction in the Additive Manufacturing via High Speed Sintering, ASME Manufacturing Science and Engineering Conference. Los Angeles, CA, 2017.
    3. Olson, W.M., & Kim, D. (2017). Addressing Transfer Conditions across Disciplines: Cultivating Connections from First-Year Composition to Upper-Division Engineering Laboratory Courses. Conference on College Composition and Communication: Portland, OR, March 2017.
    4. Kim, J. H., Kim, D.-W. (2017) “Integrating collaborative writing in an engineering class.” ASEE Pacific Northwest Section Conference, Seattle, WA, 2017.
    5. Swan, S., & Kim, D. (2016). Investigation of Advanced Hard Coatings for the Protection of Cemented Carbides in Drilling CFRP-Ti Stacks.  SME AeroDef Manufacturing, Long Beach, CA, Feb. 8-10, 2016.
    6. Hurst, A., Tan, H., & Kim, D. (2016). A preliminary study on inkjet-based high-speed sintering 3D printing for a polymeric material.  SAE International AeroMat 2016 Conference, Bellevue, WA, 2016.
    7. Kim, D. (2016). A Preliminary study on the effect of drill geometry on the surface quality of CFRP holes. SAE International AeroMat 2016 Conference, Bellevue, WA, 2016.
    8. Olson, W., and Kim, D. (2016). Connecting the Curriculum: Designing WID Programs for the 21st Century. Panel: Beyond Transfer: Difference, Inclusion, and WAC/WID in the 21st Century. International Writing across the Curriculum Conference: Ann Arbor, MI, June 2016.
    9. Kim, D. (2016). Crossing the Threshold by Supporting Writing Transfer in Introductory Engineering Laboratories.  NSF Symposium-Envisioning the Future of Undergraduate STEM Education: Research and Practice on April 27-29, 2016 in Washington, DC.
    10. Alizadeh Ashrafi, S., Kim, D., (2015) “Fiber pull-out characterization in drilling of carbon fiber reinforced composites,” the AeroMat 2015, Long Beach, CA, 2015.
    11. Garate, J., Kim, D., and Solovitz, S., (2015) “A Preliminary Study on Glass Fiber Reinforced Thermoplastic Composite Fabrication for Small Wind Turbine Blade,” the AeroMat 2015, Long Beach, CA, 2015.
    12. Olson, W.M., Kim, D., (2015) “Taking Chances: An Interdisciplinary Study on Far Transfer Practices of Engineering Students.” Panel: Risking Writing Knowledge: Investigating Writing Transfer Across the Curriculum and in the Disciplines.  Conference on College Composition and Communication: Tampa, FL, March 2015. (Acceptance rate: ~30%)
    13. Alizadeh Ashrafi, S., Stockton, D., and Kim, D., (2014) “Multi-scale measures on hole quality in the drilled CFRP holes,” Proceedings of ASME-IMECE 2014, Nov 14-20, 2014, Montreal, Canada.
    14. Yuksel, T., Stockton, D., Marshall, P., Gurocak, H., Kim, D., (2014) “Preliminary study on developing an intelligent resin delivery system for manufacturing large composite structure,” Proceedings of International Symposium on Green Manufacturing and Applications (ISGMA 2014), June 24-28, 2014, Pusan, Korea.
    15. Solovitz, S., Kim, D., & Ogden, D. (2012) “Experimental Investigation of Vent Evolution for High-speed Jets.” AGU Fall Meeting, San Francisco, CA. 2012 (Technical report V11B-2751).
    16. Solovitz, S., Kim, D., & Ogden, D. (2012) “Evolution of Vent Geometry for High-speed Jets.” ASME IMECE, Houston, TX 2012. (Technical report IMECE 2012-88292).
    17. Kim, S., Kim, D., He, B. (2012) Influence of Interference-Fit Techniques on Bearing Strength Properties of Pin-Loaded Carbon Fiber Reinforced Plastics (CFRP) Composites.  ASME IMECE Design, Materials and Manufacturing, Houston, TX, 2012.
    18. Kim, D., Sturtvant, C., & Kwon, P. (2012) Effect of ultra-hard coatings on hole quality of carbon fiber reinforced composites (CFRP) in drilling.  ASME IMECE Design, Materials and Manufacturing, Houston, TX, 2012.
    19. Lei, N., Chen, Z., Kim, D., Xue, W., & Xu, J. (2012). Maskless fabrication of graphene nano-ribbons using focused-ion beam.  ASME IMECE Micro and Nano Technology Forum, Houston, TX, 2012 (Technical report IMECE2012-88390).
    20. Wan, Y., Kim, D., and Park, Y. (2011) “Micro Electro Discharge Machining of Polymer-Carbon Nanotube Composites.”  Proceedings of International Symposium on Green Manufacturing and Applications (ISGMA 2011), Oct. 6-7, 2011, Seoul, Korea.
    21. Park, K., Kwon, P., Kim, D., and Beal, A. (2011) “Study on tool wear in drilling of composite/titanium stack with carbide tools.”  Proceedings of International Symposium on Green Manufacturing and Applications (ISGMA 2011), Oct. 6-7, 2011, Seoul, Korea.

     

    Non-refereed Conference Papers/Abstracts/Presentations

    1. Kim, D., “Machinability issues in drilling of CFRP/titanium stacks,” Proceedings of Korean-American Scientists and Engineers Northwest Regional Conference 2015, Boise, ID, October 10-11, 2015.
    2. Kim, D., “Focused ion beam machining of Polymethylmethacrylate(PMMA)/Multi-Walled Carbon Nanotube(MWCNT) Nanocomposites,” NSF Workshop on Advanced Manufacturing for Smart Goods, Portland, OR, May 14-15, 2015.
    3. Cho, D.Y., Cha, J.H., Jung, H.B., Song, H.C., Kim, D. “Development of ship block logistics system on mobile devices,” Proceedings of US-Korea Summit on Science and Engineering, San Francisco, CA, 2014.
    4. Kim, D. “Hybrid GFRP Composites for Wind Turbine Blades.” Proceedings of US-Korea Summit on Science and Engineering, Anaheim, CA 2012.
    5. Kim, D. “Fatigue Enhancement of Interference Fit Joints in Composites.”  Proceedings of US-Korea Summit on Science and Engineering, Park City, UT 2011.
    6. Kim, D., “Solid freeform fabrication of high dense metallic products” Proceedings of Korean-American Scientists and Engineers Northwest Regional Conference 2009, Bellevue, WA, 2009.
    7. Kim, D., “Machining of hybrid composites in aerospace applications” Proceedings of Korean-American Scientists and Engineers Northwest Regional Conference 2007, Portland, OR, 2007.
    8. Kim, B., Lim, B., Lee, D., Kim, D., “Creep rupture strength in 9Cr-1.5Mo steels with addition of boron,” Asian Pacific Conference on Fracture and Strength 2006, Sanya of Hainan Island, China, 2006.
    9. Kim, D., Flinn, B. D., Spitsen, R., Ramulu, M., “The effects of weld quality on fatigue enhancement process for low carbon steel resistance spot welds,” Proceedings of the Society of Experimental Mechanics Conference 2005 in Portland, OR, 2005.
    10. Kim, D., Stoebe, T., “Manufacturing Technology Curriculum Research and Development for Community and Technical Colleges in Washington State,” Proceedings of AACC/Advanced Technological Education Conference, Contributed Paper Session, Omni Shoreham Hotel, Washington, DC, October 13-16, 2004.