Skip to main content Skip to navigation
Microscale Thermo-Fluid Lab Journal Articles
  1. Cai, X., Ding, S., Shi, Q., Lyu, Z., Liu, D., Dong, W., Du, M., Dutta, P., Song, Y., Du, D., and Lin, Y., 2020, “Eyeball-like yolk−shell bimetallic nanoparticles for synergistic
    photodynamic−photothermal therapy
    ”, ACS Applied Bio Materials, Vol. 3, 5922-5929.
  2. Ding, S., Khan, A.I., Cai, X., Song, Y., Lyu, Z., Du, D., Dutta, P., and Lin, Y., 2020, “Overcoming blood–brain barrier transport: Advances in nanoparticle-based drug delivery strategies”, Materials Today, Vol. 37, 112-125.
  3. Jewel, Y., Dinh, Q.V., Liu, J., and Dutta, P., 2020, Substrate-dependent transport mechanism in AcrB of multidrug resistant bacteria, Proteins, Vol. 88, 853-864.
  4. Morshed, A., Karawdeniya, B. I., Bandara, Y. N. D., Kim, M. J., and Dutta, P., 2020, “Mechanical characterization of vesicles and cells: A review ”, Electrophoresis, Vol. 41(7-8), 449-470.
  5. Khan, A.I., Liu, J., and Dutta, P., 2020, Bayesian inference for parameter estimation in lactoferrin-mediated iron transport across blood-brain barrier, Biochimica et Biophysica Acta (BBA)– General Subjects, Vol. 1864, 1-13.
  6. Khan, A.I., and Dutta, P., 2019, Analytical Solution of Time-Periodic Electroosmotic Flow through Cylindrical Microchannel with Non-Uniform Surface Potential, Micromachines, Vol. 10(8), 498.
  7. Deng, H., Dutta, P., and Liu, J., 2019, Entry Modes of Ellipsoidal Nanoparticle by Membrane during Clathrin-mediated Endocytosis, Soft Matter, Vol. 15, 5128-5137.
  8. Deng, H., Dutta, P., and Liu, J., 2019, “Stochastic Modeling of Nanoparticle Internalization and Expulsion through Receptor-mediated Transcytosis”, Nanoscale, (In-Press).
  9. Morshed, A., Dutta, P., and Kim, M.J., 2019, Electrophoretic Transport and Dynamic Deformation of Bio-vesicles, Electrophoresis, Vol. 40, 2584-2591. Featured on the Back Cover.
  10. Song, Y., Cai, X., Du, D., Dutta, P., and Lin, Y., 2019, Comparison of Blood-Brain Barrier Models for in vitro Biological Analysis: One Cell Type vs Three Cell Types, ACS Applied Bio Materials, Vol. 2, 1050-1055.
  11. Dutta, P. and Gas, B, 2019, “Editorial – Fundamentals of Electrophoresis 2019” Electrophoresis, Vol. 40(5), 605.
  12. Kim, H., Khan, A.I. and Dutta, P., 2019, “Time-Periodic Electro-Osmotic Flow with Nonuniform Surface Charges”, ASME Journal of Fluids Engineering, Vol. 141, pp 081201.
  13. Darvish, A., Lee, J.S., Saharia, J., Sundaram, R.V.K., Goyal, G., Bandara, N., Ahn, C.W., Kim, J., Dutta, P., Chaiken, I., and Kim, M.J., 2019, “Mechanical Characterization of HIV-1 with a Solid State Nanopore Sensor”, Electrophoresis, Vol. 40(5), 776-783.
  14. Majee, P.S., Bhattacharyya, S., Dutta, P., 2019, “On Electrophoresis of a pH-regulated Nanogel with Ion Partitioning Effects”, Electrophoresis, Vol. 40(5), 699-709.
  15. Khan, A.I., Lu, Q., Du, D., Lin, Y., and Dutta, P., 2018, “Quantification of Kinetic Rate Constants for Transcytosis of Polymeric Nanoparticle through Blood-Brain Barrier”, Biochimica et Biophysica Acta (BBA)– General Subjects, Vol. 1862(12), 2779–2787.
  16. Lu, Q., Cai, X., Zhang, X., Li, S., Song, Y., Du, D, Dutta, P., and Lin, Y., 2018, “Synthetic Polymer Nanoparticles Functionalized with Different Ligands for Receptor-mediated Transcytosis across Blood-Brain Barrier”, ACS Applied Bio Materials, Vol. 1(5), 1687-1694.
  17. Morshed, A., Dutta, P., Hossan, M.R., and Dillon, R., 2018, “Electrodeformation of Vesicles Suspended in a Liquid Medium”, Physical Review Fluids, Vol. 3(10), 103702.
  18. Deng, H., Dutta, P., and Liu, J., 2018, “Stochastic Simulations of Nanoparticle Internalization through Transferrin Receptor Dependent Clathrin-mediated EndocytosisBiochimica et Biophysica Acta (BBA)– General Subjects, Vol. 1862(9), 2104-2111.
  19. Hossan, M.R., Dutta, D., Islam, N., and Dutta, P., 2018, “Review: Electric Field Driven Pumping in Microfluidic Device”, Electrophoresis, Vol. 39(5-6), 702-731.
  20. Khan, A.I., Liu, J., and Dutta, P., 2018, “Iron Transport Kinetics through Blood-Brain Endothelial Cells”, Biochimica et Biophysica Acta (BBA)– General Subjects, Vol. 1862(5), 1168-1179.
  21. Morshed, A., Dutta, P., and Dillon, R., 2018, “Mathematical Modeling and Numerical Simulation of the TGFBeta/Smad Signaling Pathway in Tumor Microenvironments”, Applied Numerical Mathematics, Vol. 133, 41-51.
  22. Morshed, A. and Dutta, P., 2018, “Mathematical Model for Tissue-Level Hypoxic Response in Microfluidic Environment”, ASME Journal of Biomechanical Engineering, Vol. 140, 011009.
  23. Dutta, P., 2018, “Editorial – Fundamentals of Electrophoresis 2018”, Electrophoresis, Vol. 39(5-6), 689.
  24. Yoo, K., Banerjee, S., Kim, J., and Dutta, P., 2017, “A Review of Lithium-Air Battery Modeling Studies Energies, Vol. 10(11), 1748.
  25. Gannarapu, A., Dutta, P., and Gozen B. A., 2017, “Prediction of Steady State Freeze Front Position during 3D Printing of Microstructures”, International Journal of Heat and Mass Transfer, Vol. 115, 743-753.
  26. Song, Y., Du, D., Li, L., Dutta, P., Xu, J. and Lin, Y., 2017 “In Vitro Study of Receptor-mediated Silica Nanoparticles Delivery across Blood-Brain Barrier”, ACS Applied Materials and Interfaces, Vol. 9(24), 20410-20416.
  27. Jewel, Y., Liu, J., and Dutta, P., 2017, “Coarse-grained Simulations of Conformational Changes in Multidrug Efflux Transporter AcrB”, Molecular Biosystems, Vol. 13(10), 2006-2014.
  28. Dutta, P., 2017, “Editorial – Fundamentals of Electrophoresis”, Electrophoresis”, Vol. 38(5), 561-562.
  29. Cho, M., Dutta, P. and Shim, J., 2017, “A Non-Sampling Mixing Index for Multicomponent Mixtures”, Powder Technology, Vol. 319, 434-444.
  30. Jewel, Y., Dutta, P., and Liu, J., 2017, “Exploration of conformational changes in lactose permease upon sugar binding and proton transfer through coarse‐grained simulations”, Proteins, Vol. 85, 1856-1865.
  31. Morshed, A. and Dutta, P., 2017, “Hypoxic Behavior in Cells under Controlled Microfluidic Environment”, Biochimica et Biophysica Acta (BBA)– General Subjects, Vol. 1861(4), 759-771.
  32. Shim, J., Yoo, K. and Dutta, P., 2017, “Steady‐state Protein Focusing in Carrier Ampholyte‐based Isoelectric Focusing: Part I–Analytical Solution”, Electrophoresis, Vol. 38, 659-666.
  33. Shim, J., Yoo, K. and Dutta, P., 2017, “Steady‐state Protein Focusing in Carrier Ampholyte‐based Isoelectric Focusing: Part II–Validation and Case Studies”, Electrophoresis, Vol. 38, 667-676.
  34. Hossan, M.R., Gopmandal, P. P., Dillon, R., and Dutta, P., 2016 “A Comprehensive Numerical Investigation of DC Electrophoretic Particle-Particle Interactions and Assembly”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 506, pp 127-137.
  35. Yoo, K., Song, M. K., Cairns, E. J., and Dutta, P., 2016, “Numerical and Experimental Investigation of Performance Characteristics of Lithium/Sulfur Batteries”, Electrochimica Acta, Vol. 213, pp 174-185.
  36. Jewel, Y., Dutta, P., and Liu, J., 2016, “Coarse-grained Simulations of Proton-dependent Conformational Changes in Lactose Permease”, Proteins, Vol. 84(8), pp 1067-1074.
  37. Rezanoor, W. and Dutta, P., 2016, “Combined AC Electroosmosis and Dielectrophoresis for Controlled Rotation of Microparticles”, Biomicrofluidics Vol. 10(2), pp 024101.
  38. Jewel, Y., Yoo, K., Liu, J. and Dutta, P., 2016, “Self-Assembled Peptides for Coating of Active Sulfur Nanoparticles in Lithium-Sulfur Battery”, Journal of Nanoparticle Research, Vol. 18:54.
  39. Yoo, K., Dive, A., Kazemiabnavi, S., Banerjee, S., and Dutta, P., 2016, “Effects of Operating Temperature on the Electrical performance of a Li-Air Battery Operated with Ionic Liquid Electrolyte”, Electrochimica Acta, Vol. 194, pp 317-329.
  40. Sze, T.J., Liu, J. and Dutta, P., 2015, “Design and Modeling of a Light Powered Biomimicry Micropump”, Journal of Micromechanics and Microengineering, Vol. 25, pp 065009.
  41. Yoo, K., Deshpande, A., Banerjee, S., and Dutta, P., 2015, “Electrochemical Model for Ionic Liquid Electrolytes in Lithium Batteries”, Electrochimica Acta, Vol. 176, pp 301-310.
  42. S. Kazemiabnavi, P. Dutta and S. Banerjee, 2015, A Density Functional Theory Based Study of the Electron Transfer Reaction at the Cathode-Electrolyte Interface in Lithium-Air Battery”, Phys. Chem. Chem. Phys., Vol. 17, pp 11740-11751.
  43. Hossan, M.R., Gopmandal, P. P., Dillon, R., and Dutta, P., 2015, “Bipolar Janus Particle Assembly in Microdevice”, Electrophoresis, Vol. 36(5), pp 722-730.
  44. Yoo, K., Shim, J. and Dutta, P., 2014, “Effect of Joule Heating on Isoelectric Focusing of Proteins in a Microchannel”, Biomicrofluidics Vol. 8(6), pp 064125.
  45. Kazemiabnavi, S., Dutta, P., Banerjee, S., 2014, “Density Functional Theory Based Study of the Electron Transfer Reaction at the Lithium Metal Anode in Lithium-Air Battery with Ionic Liquid Electrolytes”, Journal of Physical Chemistry C, Vol. 118(47), pp 27183-27192.
  46. Yoo, K., Shim, J., Lin, J., and Dutta, P., 2014, “Mathematical and Numerical Model to Study Two Dimensional Free Flow Isoelectric Focusing”, Biomicrofluidics, Vol. 8(3), pp 034111.
  47. Yoo, K. Banerjee, S., and Dutta, P., 2014, “Modeling of Volume Change Phenomena in a Li-Air Battery”, Journal of Power Sources, Vol. 258, pp 340-350.
  48. Jubery, T.Z., Srivastava, S.K., and Dutta, P., 2014, “Dielectrophoretic Separation of bioparticles in Microdevices: A Review”, Electrophoresis, Vol. 35, pp 691-713.
  49. Sze, T.J., Liu, J. and Dutta, P., 2014, “Numerical Modeling of Flow through Phloem Considering Active Loading”, ASME Journal of Fluids Engineering, Vol. 136, pp 021206.
  50. Yoo, K., Shim, J., Liu, J. and Dutta, P., 2014, “Efficient Algorithm for Simulation of Isoelectric Focusing”, Electrophoresis, Vol. 35, pp 638-645.
  51. Hossan, M.R., Dillon, R., and Dutta, P., 2014, “Hybrid Immersed Interface-Immersed Boundary Methods for AC Dielectrophoresis”, Journal of Computational Physics, Vol. 270, pp 640-659.
  52. Sze, T.J., and Dutta, P., and Liu, J., 2014, “Study of Protein Facilitated Water and Nutrient Transport in Plant Phloem”, ASME Journal of Nanotechnology in Engineering and Medicine, Vol. 4, pp. 031005.
  53. Deshpande, A., Kariyawasam, L., Dutta, P., Banerjee, S., 2013, “Enhancement of Lithium Ion Mobility in Ionic Liquid Electrolytes in Presence of Additives”, Journal of Physical Chemistry C, Vol. 117(48), pp. 25343-25351.
  54. Jubery, T.Z. and Dutta, P., 2013, “A Fast Algorithm to Predict Cell Trajectories in Microdevices using Dielectrophoresis”, Journal of Numerical Heat Transfer, Part – A, Vol. 64, pp. 107-131.
  55. Hossan, M.R., Dillon, R., Roy, A. K., and Dutta, P., 2013, “Modeling and Simulation of Dielectrophoretic Particle-Particle Interaction and Assembly”, Journal of Colloids and Interface Sciences, Vol. 394, pp. 619-629.
  56. Sprague, I. B. and Dutta, P., 2013, “Improved Kinetics from Ion Advection through Overlapping Electric Double Layers in Nano-Porous Electrodes”, Electrochimica Acta, Vol. 91, pp. 20-29.
  57. Jubery, T.Z. and Dutta, P., 2013, “A New Design for Efficient Dielectrophoretic Separation of Cells in a Microdevice”, Electrophoresis, Vol. 34, pp. 643-650.
  58. Mani, K.B., Hossan, M.R. and Dutta, P., 2013, “Thermal Analysis of Microwave Assisted Bonding of Poly(methyl methacrylate) Substrates in Microfluidic Devices”, International Journal of Heat and Mass Transfer, Vol. 58, pp. 229-239.
  59. Sprague, I. B. and Dutta, P., 2012, “Performance Improvement of Micro-Fuel Cell by Manipulating the Charged Diffuse layer”, Applied Physics Letters, Vol. 101, 113903.
  60. Shim, J. and Dutta, P., 2012, “Joule Heating Effect in Constant Voltage Mode Isotachophoresis in a Microchannel”, International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 13(5), pp. 333-344.
  61. Sprague, I. B., and Dutta, P., 2012, “Depth Averaged Analytical Solution for a Laminar Flow Fuel Cell with Electric Double Layer Effects,” SIAM Journal on Applied Mathematics, Vol. 72, pp. 1149-1168.
  62. Hossan, M.R. and Dutta, P., 2012, “Effects of Temperature Dependent Properties in Electromagnetic Heating” International Journal of Heat and Mass Transfer, Vol. 55, pp. 3412-3422.
  63. Jubery, T. Z., Hossan, M.R., Bottenus, D., Ivory, C.F., Dong, W., and Dutta, P., 2012, “A New Fabrication Technique to Form Complex PMMA Microchannel for Bioseparation” Biomicrofluidics, Vol. 6, pp. 016503.
  64. Jubery, T, Prabhu, A., Kim, M.J., and Dutta, P., 2012, “Modeling and Simulation of Nanoparticle Separation through a Solid State Nanopore,” Electrophoresis, Vol. 33, pp. 325-333.
  65. Jang, W., Shim, J., Lee, D.Y., Dutta, P., and Cho, K.H., 2011 “Rapid Detection of Dysfunctional High-Density Lipoproteins using Isoelectric Focusing Based Microfluidic Device to Diagnose Senescence related Disease,” Electrophoresis, Vol. 32, pp. 3415-3423.
  66. Bottenus, D., Hossan, M.R., Ouyang, Y., Dong, W., Dutta, P., and Ivory, C.F., 2011, “Preconcentrationi and Detection of the Phosphorylated forms of Cardiac Troponin I in a Cascade Microchip by Cationic isotachophoresis” Lab on a Chip, Vol. 11, 3793-3801.
  67. Qiao, Y., Tang, H., Munske, G. R., Dutta, P., Ivory, C.F., and Dong, W., 2011, “Enhanced Fluorescence Anisotropy Assay for Human Cardiac Troponin I and T Detection,” Journal of Fluorescence, Vol. 21(6), pp. 2101-2110.
  68. Sprague, I. B., and Dutta, P., 2011, “Role of Diffuse layer in Acidic and Alkaline Fuel Cells,” Electrochimica Acta, Vol. 56, pp 4518-4525.
  69. Bottenus, D., Jubery, T.Z., Dong, W., Ouyang, Y., Dutta, P., and Ivory, C.F., 2011, “10,000-Fold Concentration Increase of the Biomarker Cardiac Troponin I in a Reducing Union Microfluidic Chip using Cationic Isotachophoresis,” Lab on a Chip, Vol. 11, pp 890-898.
  70. Shim, J, Cho, M., Dutta, P., 2011, “A Method to Determine Quasi Steady State in Constant Voltage Mode Isotachophoresis” Electrophoresis, Vol. 32, pp 988-995.
  71. Sprague, I. B., and Dutta, P., 2011, “Modeling of Diffuse Charge Effects in a Microfluidic Based Laminar Flow Fuel Cell,” Numerical Heat Transfer: Part A, Vol. 59, pp 1-27.
  72. Bottenus, D., Jubery, T.Z., Dutta, P., and Ivory, C.F., 2011, “10,000 Fold Concentration Increase in Proteins in a Cascade Microchip using Anionic ITP by a 3D Numerical Simulation with Experimental results,” Electrophoresis, Vol. 32, pp 550-562.
  73. Sprague, I., Byun, D., and Dutta, P., 2010, “Effects of Reactant Crossover and Electrode Dimensions on the Performance of a Microfluidic Based Laminar Flow Fuel Cell,” Electrochimica Acta, Vol. 55(28), pp 8579-8589.
  74. Hossan, M.R., Byun, D., and Dutta, P., 2010, “Analysis of Microwave Heating for Cylindrical Shaped Objects,” International Journal of Heat and Mass Transfer, Vol. 53(23-24), pp 5129-5138.
  75. Prabhu, A. S., Jubery, T. Z, Freedman, K., Mulero, R., Dutta, P., Kim, M., 2010, “Chemically Modified Solid State Nanopores for High Throughput Nanoparticle Separation” Journal of Physics- Condensed Matter, Vol. 22(45), 454107.
  76. Byun, D., Nguyen, V.D., Dutta, P., and, Park, H.C., 2010, “A Hybrid Inkjet Printer utilizing Electrohydrodynamic Jetting and Piezoelectric Actuation” Japanese Journal of Applied Physics, Vol. 49, 060217.
  77. Sprague, I., Dutta, P., and Ha, S., 2010, “Flow Rate Effect on Methanol Electro-oxidation in a Microfluidic Laminar Flow System,” Journal of New Materials for Electrochemical Systems, Vol. 13(4), 305-313.
  78. Yudistira, H.T., Nguyen, V.D., Dutta, P., and Byun, D., 2010, “Flight Behavior of Charged Droplets in Electrohydrodynamic Inkjet Printing” Applied Physics Letters, Vol. 96, 023503.
  79. Schwarzkopf, J., Penoncello, S.G., and Dutta, P., 2009, “Enhanced Boiling Heat Transfer in Mesochannels” International Journal of Heat and Mass Transfer, Vol. 52, pp. 5802-5813.
  80. Schwarzkopf, J., Crowe, C.T., and Dutta, P., 2009, “Application of Volume Averaged K-ε Model to Particle Laden Turbulent Channel Flow” Journal of Fluids Engineering, Vol.131, pp. 101301.
  81. Schwarzkopf, J., Crowe, C.T., and Dutta, P., 2009, “Direct Numerical Simulation of Stationary Particles in Homogeneous Turbulent Decay: Application of the K-ε Model” International Journal of Multiphase Flow, Vol. 35, pp. 411-416.
  82. Chein, R., and Dutta, P., 2009, “Effect of Charged Membrane on the Particle Motion through a Nanopore,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 341, pp 1-12.
  83. Shim, J., Dutta, P., and Ivory, C. F., 2009, “Parallel Implementation of Finite Volume Schemes for Isoelectric Focusing,” Journal of Mechanical Science and Technology, Vol. 23(12), pp. 3169-3178.
  84. Shim, J., Dutta, P., and Ivory, C. F., 2009, “Dispersion of Protein Bands in a Horse Shoe Microchannel during Isoelectric Focusing,” Electrophoresis, Vol. 30, pp 723-731.
  85. Sprague, I., Dutta, P., and Ha, S., 2009, “Characterization of a Membraneless Direct-Methanol Micro Fuel Cell,” Proc. IMechE, Part A: J. Power and Energy, Vol. 223 (7), pp. 799-808.
  86. Schwarzkopf, J., Crowe, C. T., and Dutta, P., 2009, “A Turbulence Dissipation Model for Particle Laden Flow” AIChE Journal, Vol. 55(6), pp 1416-1425.
  87. Schwarzkopf, J., Crowe, C. T., and Dutta, P., Li, B.Q., 2009, “Atomized Non-equilibrium Two-phase Flow in Mesochannels: Momentum Analysis,” International Journal of Heat and Fluid Flow, Vol. 30, pp. 99-107.
  88. Dutta, P. and Morse, J.S. 2008, “A Review of Recent Patents in Nanofluidics,” Recent Patents on Nanotechnology, Vol. 2(3), pp 150-159.
  89. Shim, J., Dutta, P., and Ivory, C. F., 2008, “A pK Determination Method for Proteins from Titration Curves Using Principal Component Analysis,” AIChE Journal, Vol. 54(9), pp. 2238-2249.
  90. Shim, J., Dutta, P., and Ivory, C. F., 2008, “Effects of Ampholyte Concentration on Protein Behavior in on-chip Isoelectric Focusing,” Electrophoresis, Vol. 29(5), pp 1026-1035.
  91. Shim, J., Dutta, P., and Ivory, C. F., 2008, “Effects of Ampholyte Dissociation Constants on Protein Separation in on-Chip Isoelectric Focusing,” Journal of Nanoscience and Nanotechnology, Vol. 8, pp 3719-3728.
  92. Wang, Y., Zhe, J., Chung, B., and Dutta, P., 2008, A Rapid Magnetic Particle Driven Micromixer,” Microfluidics and Nanofluidics, Vol. 4(5), pp. 375-389.
  93. Shim, J., Dutta, P., and Ivory, C. F., 2007, “Finite Volume Methods for Isotachophoretic Separation in Microchannels,” Numerical Heat Transfer, Part A: Applications, Vol. 52(5), pp 441-461.
  94. Horiuchi, K., Dutta, P., Ivory, C. F., 2007 “Electroosmosis with Step Changes in Zeta Potential in Microchannels,” AIChE Journal, Vol. 53(10), pp 2521-2533.
  95. Cui, H., Dutta, P., and Ivory, C. F., 2007, “Automated Electric Valve for Electrokinetic Separation in a Networked Microfluidic Chip,” Analytical Chemistry, Vol. 79(4), pp. 1456-1465.
  96. Zhe, J., Jagtiani, A., Dutta, P., Hu, J., and Carletta, J., 2007, “A Micromachined High Throughput Coulter Counter for Bioparticle Detection and Counting,” Journal of Micromechanics and Microengineering, Vol. 17, pp. 304-313.
  97. Shim, J., Dutta, P., and Ivory, C. F., 2007, “Modeling and Simulation of Isoelectric Focusing (IEF) in Two-Dimensional (2-D) Microgeometries,” Electrophoresis, Vol. 28, pp. 572-586.
  98. Horiuchi, K. Dutta, P., and Richards, C. D., 2007, “Experiment and Simulation of Mixed Flows in a Trapezoidal Microchannel,” Microfluidics and Nanofluidics, Vol.3, pp. 347-358.
  99. Cui, H., Dutta, P., and Ivory, C. F., 2007 “Isotachophoresis of Proteins in a Networked Microfluidic Chip: Experiment and 2-D Simulation,” Electrophoresis, Vol. 28, pp. 1138-1145.
  100. Wang, Y., Zhe, J., Dutta, P., and Chung, B., 2007, “A Microfluidic Mixer Utilizing Electrokinetic Relay Switching and Asymmetric Flow Geometries,” ASME Journal of Fluids Engineering, Vol. 129, pp. 395-403.
  101. Horiuchi, K. and Dutta, P., 2006, “Heat Transfer Characteristics in Mixed Electroosmotic and Pressure Driven Flows,” JSME International Journal Series B (Fluids and Thermal Engineering), Vol. 49, pp. 812-819.
  102. Mamun, N. and Dutta, P., 2006, “Patterning of Platinum Microelectrodes in Polymeric Microfluidic Chips,” Journal of Microlithography, Microfabrication and Microsystems, Vol. 5(3), pp. 039701-6.
  103. Dutta, P., Horiuchi, K., and Yin, H. M. 2006, “Thermal Characteristics of Mixed Electroosmotic and Pressure Driven Microflows,” Computers and Mathematics with Applications, Vol. 52(5), pp. 651-670.
  104. Horiuchi, K. and Dutta, P., 2006, “Electrokinetic Flow Control in Microfluidic Chips using a Field-Effect Transistor,” Lab On a Chip, Vol. 6, pp. 714-723.
  105. Salgado, J. D., Horiuchi, K, and Dutta, P., 2006, “A Conductivity Based Interface Tracking Method for Microfluidic Applications,” Journal of Micromechanics and Microengineering, Vol. 16, pp. 920-928.
  106. Horiuchi, K., Dutta, P., and Hossain, A., 2006, “Joule Heating Effects in Mixed Electroosmotic and Pressure Driven Microflows under Constant Wall Heat Flux,” Journal of Engineering Mathematics, Vol. 54, pp. 159-180.
  107. Cui, H., Horiuchi, K., Dutta, P., and Ivory, C. F., 2005 “Multistage Isoelectric Focusing in a Polymeric Microfluidic Chip,” Analytical Chemistry, Vol. 77, pp. 7878-7886.
  108. Hossain, A., Alam, M., Yonge, D. R., and Dutta, P., 2005, “Finite Element Modeling of Cr(VI) Reduction by Shewanella Oneidensis MR-1 Employing the Duel Enzyme Kinetic Model,” Computers and Geosciences, Vol. 31, pp. 1286-1292.
  109. Cui, H., Horiuchi, K., Dutta, P., Ivory, C. F., 2005 “Isoelectric Focusing in a Poly-di-methyl-siloxane Microfluidic Chip,” Analytical Chemistry, Vol. 77, pp. 1303-1309.
  110. Hossain, A., Alam, M., Yonge, D. R., and Dutta, P., 2005, “Efficiency and Flow Regime of a Highway Stormwater Detention Pond in Washington, USA,” Water, Air, and Soil Pollution, Vol. 164, pp. 79-89.
  111. Cheng, G. J., Pirzada, D., and Dutta, P., 2005, “Design and Fabrication of a Hybrid Nanofluidic Channel,” Journal of Microlithography, Microfabrication and Microsystems, Vol. 4(1), pp. 013009.
  112. Dutta, P. and Hossain, A., 2005, “Internal Cooling Augmentation in Rectangular Channel using Two Inclined Baffles,” International Journal of Heat and Fluid Flow, Vol. 26(2), pp. 223-232.
  113. Horiuchi, K. and Dutta, P., 2004, “Joule Heating Effects in Electroosmotically Driven Microchannel Flows,” International Journal of Heat and Mass Transfer, Vol. 47, pp. 3085-3095.
  114. Dutta, P., Beskok, A., and Warburton, T. C., 2002, “Numerical Simulation of Mixed Electroosmotic/Pressure Driven Microflows,” Numerical Heat Transfer, Part A, Vol. 41, pp. 131-148.
  115. Dutta, P., Beskok, A., and Warburton, T. C., 2002, “Electroosmotic Flow Control in Complex Microgeometries,” ASME & IEEE Journal of Micro Electro Mechanical Systems (JMEMS), Vol. 11(1), pp. 36-44.
  116. Dutta, P. and Beskok, A., 2001, “Analytical Solution of Time Periodic Electroosmotic Flows: Analogies to Stokes’ Second Problem,” Analytical Chemistry, Vol. 73, pp. 5097-5102.
  117. Dutta, P. and Beskok, A., 2001, “Analytical Solution of Combined Electroosmotic /Pressure Driven Flows in Two Dimensional Straight Channels: Finite Double Layer Effects,” Analytical Chemistry, Vol. 73, pp. 1979-1986.
  118. Dutta, S., Dutta, P., Jones, R.E., and Khan, J.A., 1998, “Heat Transfer Coefficient Enhancement with Perforated Baffles,” ASME Journal of Heat Transfer, Vol. 120(3), pp 795-797.
  119. Dutta, P., Khan, R.U., Salam, A., and Uddin, M.W., 1997, “Stability Analysis of a Toroidal Pipe Reducer Under Uniform External Pressure,” Int. Journal of Pressure Vessels and Pipings, Vol. 72, pp 203-218.
  120. Dutta, P. and Dutta, S., 1997, “Effect of Baffle Size, Perforation, and Orientation on Internal Heat Transfer Enhancement,” International Journal of Heat and Mass Transfer, Vol. 41(19), pp 3005-3013.